Biomicrogel Group
8 King Edward Street, OX1 4HL, Oxford, Oxfordshire.
Hangzhou, Hangzhou, Zhejiang Province.
2-11 Ulica Sadowa, 20-027, Lublin, Lublin Voivodeship.
+7 (343) 288-76-95 +44 20 8157 7011 info@biomicrogel.com sales@biomicrogel.com
Biomicrogel® Sorbent BMG-P1
To all products

Biomicrogel® Sorbent BMG-P1

Biomicrogel® Sorbent BMG-P1 is designed to collect oil contaminants from the surface of water

Sorbent BMG–P1–01 in a 25 kg bag Sorbent solution BMG–P101–01 in a 1000 L container Sorbent solution BMG–P101–01 in a 200 kg barrel Sorbent solution BMG–P101–01 in a 20 L canister

Specifications

Physical form: powder, solution
рН value: 3.0–5.0
Viscosity: 40–50 MPa*s
Bulk density: 0.62 g/cm³
Color: dark brown

High efficiency

Removes even iridescent film

Speed

Immediately reacts and encapsulates petroleum products

Versatility

Can be applied and collected by means of a wide range of available equipment and it doesn’t generate secondary pollution

Processability

Has no impact on the chemical composition of collected oils and petroleum products. Enables the full recovery of collected petroleum products

Biodegradability and environmental friendliness

Obtained by the processing of plant raw materials and is completely safe for the environment. It doesn’t burn, doesn’t stick to birds, animals, or infrastructure

Distinctiveness

These technologies are patented in more than 50 countries around the world

Learn more

Biomicrogel® Sorbent BMG-P1 is an environmentally safe sorbent of natural polysaccharides, capsulating oils, and petroleum products, which enables its easy separation from water.

Upon contact with any lubricants, oil, or petroleum products in saline water, it immediately forms a submicron polymer film at the oil–water interface, forming microcapsules with these pollutants contained inside. After that the microcapsules merge with each other turning the source petroleum product into a viscous jelly which is much easier to collect from the water surface.

In this form the petroleum products do not spread out over long distances (the oil spill area can be reduced by up to 50 times), it does not stick to other surfaces (plants, birds, fishes, mammals, equipment, rocks etc.), and doesn’t catch fire or promote burning. Afterwards, the petroleum products can be returned to the process cycle after their removal.

Biomicrogel® Sorbent BMG-P1 is applied to the water’s surface by means of spraying equipment. After that, the jellified pollutants are removed from the water’s surface by any means available (fine-meshed screen, netted spade, dust pans, etc.)

Place an order

Biomicrogel® Sorbent BMG-P1 is an environmentally safe sorbent of natural polysaccharides, capsulating oils, and petroleum products, which enables its easy separation from water.

Upon contact with any lubricants, oil, or petroleum products in saline water, it immediately forms a submicron polymer film at the oil–water interface, forming microcapsules with these pollutants contained inside. After that the microcapsules merge with each other turning the source petroleum product into a viscous jelly which is much easier to collect from the water surface.

In this form the petroleum products do not spread out over long distances (the oil spill area can be reduced by up to 50 times), it does not stick to other surfaces (plants, birds, fishes, mammals, equipment, rocks etc.), and doesn’t catch fire or promote burning. Afterwards, the petroleum products can be returned to the process cycle after their removal.

Biomicrogel® Sorbent BMG-P1 is applied to the water’s surface by means of spraying equipment. After that, the jellified pollutants are removed from the water’s surface by any means available (fine-meshed screen, netted spade, dust pans, etc.)



Biomicrogel® Sorbent BMG-P1 is an environmentally safe sorbent of natural polysaccharides, capsulating oils, and petroleum products, which enables its easy separation from water.

Upon contact with any lubricants, oil, or petroleum products in saline water, it immediately forms a submicron polymer film at the oil–water interface, forming microcapsules with these pollutants contained inside. After that the microcapsules merge with each other turning the source petroleum product into a viscous jelly which is much easier to collect from the water surface.

In this form the petroleum products do not spread out over long distances (the oil spill area can be reduced by up to 50 times), it does not stick to other surfaces (plants, birds, fishes, mammals, equipment, rocks etc.), and doesn’t catch fire or promote burning. Afterwards, the petroleum products can be returned to the process cycle after their removal.

Biomicrogel® Sorbent BMG-P1 is applied to the water’s surface by means of spraying equipment. After that, the jellified pollutants are removed from the water’s surface by any means available (fine-meshed screen, netted spade, dust pans, etc.)

Biomicrogel® Sorbent BMG-P1 is an environmentally safe sorbent of natural polysaccharides, capsulating oils, and petroleum products, which enables its easy separation from water.

Upon contact with any lubricants, oil, or petroleum products in saline water, it immediately forms a submicron polymer film at the oil–water interface, forming microcapsules with these pollutants contained inside. After that the microcapsules merge with each other turning the source petroleum product into a viscous jelly which is much easier to collect from the water surface.

In this form the petroleum products do not spread out over long distances (the oil spill area can be reduced by up to 50 times), it does not stick to other surfaces (plants, birds, fishes, mammals, equipment, rocks etc.), and doesn’t catch fire or promote burning. Afterwards, the petroleum products can be returned to the process cycle after their removal.

Biomicrogel® Sorbent BMG-P1 is applied to the water’s surface by means of spraying equipment. After that, the jellified pollutants are removed from the water’s surface by any means available (fine-meshed screen, netted spade, dust pans, etc.)

Dilute the Biomicrogel® BMG-P1 sorbent in water using a static mixer or other appropriate mixing device suitable for making a homogeneous solution with a concentration of 1.0-2.0%.
Dilute the Biomicrogel® BMG-P1 sorbent in water using a static mixer or other appropriate mixing device suitable for making a homogeneous solution with a concentration of 1.0-2.0%.


Dilute the Biomicrogel® BMG-P1 sorbent in water using a static mixer or other appropriate mixing device suitable for making a homogeneous solution with a concentration of 1.0-2.0%.

Biomicrogel® sorbent BMG-P1 is supplied in powder form.

It is packed in 25kg polypropylene bags, and the bags are then placed on pallets. One pallet carries 20 bags, which is 500kg of sorbent.

Store the Biomicrogel® BMG-P1 sorbent in a cool and dry place. Keep the entire protective packaging safe until the product is used.

The guaranteed storage life in dry form is 24 months from the date of manufacture.

Biomicrogel® sorbent BMG-P1 is supplied in powder form.

It is packed in 25kg polypropylene bags, and the bags are then placed on pallets. One pallet carries 20 bags, which is 500kg of sorbent.

Store the Biomicrogel® BMG-P1 sorbent in a cool and dry place. Keep the entire protective packaging safe until the product is used.

The guaranteed storage life in dry form is 24 months from the date of manufacture.



Biomicrogel® sorbent BMG-P1 is supplied in powder form.

It is packed in 25kg polypropylene bags, and the bags are then placed on pallets. One pallet carries 20 bags, which is 500kg of sorbent.

Store the Biomicrogel® BMG-P1 sorbent in a cool and dry place. Keep the entire protective packaging safe until the product is used.

The guaranteed storage life in dry form is 24 months from the date of manufacture.

The recovered Biomicrogel® BMG-P1 sorbent with petroleum products capsulated in it shall be disposed of in accordance with effective legislation.

The following FCCW Code is applicable to the collected sorbent: 4 06 350 01 31 3 “Floated petroleum products from oil removers and similar facilities”.

The recovered Biomicrogel® BMG-P1 sorbent with petroleum products capsulated in it shall be disposed of in accordance with effective legislation.

The following FCCW Code is applicable to the collected sorbent: 4 06 350 01 31 3 “Floated petroleum products from oil removers and similar facilities”.



The recovered Biomicrogel® BMG-P1 sorbent with petroleum products capsulated in it shall be disposed of in accordance with effective legislation.

The following FCCW Code is applicable to the collected sorbent: 4 06 350 01 31 3 “Floated petroleum products from oil removers and similar facilities”.

Application in solutions

For responding to oil spills
Containment and the recovery of thin oil slicks from the surface of water
Need help? Send us a message and we’ll get back to you.
We process all enquiries and are able to find a customized solution for every client.
Need help? Send us a message and we’ll get back to you.
We process all enquiries and are able to find a customized solution for every client.
Cookies
We use cookies to optimize and continuously improve our website for individual users like you. Please consult our “Cookies policy” to learn more about how they are used on our website.