Biomicrogel^® BMG-C4 Product for Increasing the vegetable oils extraction recovery

Biomicrogel® BMG-C4 Product for Increasing the vegetable oils extraction recovery during their production is capable of separation of the oils from solid particles.

The objective after crushing/extraction of fruits/seeds of vegetable oil crop during oil extraction process in aqueous phase and at stages of settlement and centrifuge treatment is to maximize separation of oil held between the particles of crushed crop. Biomicrogel® BMG-C4 Product can be used at each of those stages.

Place an order

Download presentation

Biomicrogel® BMG-C4 Product in a 25 kg bag

Physical form	Powder
Bulk density	0.62 g/cm³
Color	From beige to yellow-brown
рН* value	2.0 – 6.0

High efficiency

Decreasing vegetable oil losses in effluent waters to 0.3%

Speed

Oil separation from solid particles in seconds

Versatility

– Wide range of applicable temperatures up to +95°С, doesn’t require special water conditioning for preparation of solution

Processibillity

The solution easily integrates with the current process

Biodegradability and environmental friendliness

Obtained by way of complex processing of vegetable feed, completely safe for environment, doesn’t affect the oil quality and performance

Distinctiveness

These technologies are patented in more than 50 countries around the world

How it works Preparation Transportation and storage Disposal Documents

Upon contact with oil drops in aqueous phase Biomicrogel® BMG-C4 Product stabilizes at oil-water interface forming submicron polymer films displacing the oil drops from the particles of crushed crop, after which they surface.

Unlike the other Biomicrogels® modifications used as sorbent, flocculant or flocculating agent where strength of films (microcapsules) is critical and must be maintained during ling time, it is critical in this case to just ensure their short-term presence on the surface of the solid particles, ensuring oil separation from the solids and its surfacing on water. After the process is completed Biomicrogel® BMG-C4 Product is distributed in aqueous phase and over solids.

Place an order

Delivery options

Biomicrogel® BMG-C4 Product in a 25 kg bag

Biomicrogel® BMG-С4 Product is used in form of treatment solution.

Dissolve Biomicrogel® BMG-С4 Product in water using mixer or impeller mixer or other appropriate mixing device suitable for making homogeneous solution. Recommended duration of mixing is 30 – 60 min, until the Product is fully dissolved.

The treatment solution of Biomicrogel® BMG-C4 Product is supplied either to the settlement stage or to the centrifuge treatment stage.

Biomicrogel® BMG-C4 Product is injected to the settlement of the oil extraction industry. After that, the mixture is supplied to separator through the pump, where the vegetable oil is separated from the settlement and supplied to further processing. Herewith, the settlement travels to further treatment.

Biomicrogel® BMG-С4 Product is supplied as powder.

It is packed in 25 kg polypropylene bags, and the bags are then placed on pallets. One pallet carries 20 bags – 500 kg of the Product.

To avoid hydrolysis or increase of microbial counts, fungi, hence resulting in deterioration, use Biomicrogel® BMG-С4 Product treatment solution within 7 days after preparation.

Biomicrogel® BMG-С4 Product is delivered in sterile condition; however, solutions can promote growth of airborne or aquatic bacteria and fungi. Always add biocide in storage areas where this process can occur.

It is recommended to use biocides based on isothiazoline in proportion of 700 ppm of agent per water volume. Equipment for preparation and containers for storage of Biomicrogel® BMG-С4 Product treatment solution as well as pipelines shall be pre-flushed and disinfected. Store the product in cool and dry place. Keep the entire protective packaging safe until the product is used. Guaranteed storage life – 24 months as of date of manufacture.

Biomicrogel® BMG-С4 Product shall be disposed of in accordance with effective legislation.