Biomicrogel® are modified Polysaccharides and their derivatives in microgel forms representing colloidal solution of particles from 10 to 1000 nm in size featuring reversible solvability. They are able to transform from soluble to insoluble condition and back, depending on ambient conditions: pH, temperature, ionic strength, pressure et al.
The application of these agents was extremely limited due to their high cost, until recently. For example, they were used in medicine for targeted drug delivery in human body.
We have developed a new Biomicrogel ® formulation based on common beetroot pulp and pomace, sunflower anthodium, chemical cellulose, starch et al, which enabled us to make them available for new industrial applications:
Biomicrogel® BMG-P2 flocculants separate even the most resistant (steady) oil-in-water emulsions, effectively catching any mineral and vegetable oils, animal fats, and oil and petroleum products in water effectively, based on sweep- coagulation process. After separation of oil-water mixture both treated water and removed petroleum products can be returned to the process cycle and re-used. Biomicrogel® BMG-P2 flocculants are well compatible with almost all flocculants based on inorganic salts of polyvalent metals cleaning water from suspended particles.
Biomicrogel® BMG-P1 Sorbent activity is based on the same concept. Upon contact with any lubricants, oil and petroleum products in saline water, it immediately forms submicron polymer film at the oil – water interface, forming microcapsules with these pollutants contained inside. After that the microcapsules merge with each other turning the source petroleum product into viscous jelly which is much easier collected from water surface. In this form the petroleum products do not spread out over long distances (the oil spill area can be reduced by up to 50 times), do not stick to other surfaces (plants, birds, fishes, mammals, equipment, rocks etc.), don’t catch fire and maintain burning. Herewith, the petroleum products can be returned to process cycle after removal.
Biomicrogel® BMG-C2 flocculants for treatment of water are high-molecular polymer compounds acting as molecular links designed for merging the smaller particles of pollutants in bigger and sustainable floccules (agglomerates), which easily settle/float upwards and are easily separated from water physically. Biomicrogel® BMG-C2 flocculants are well compatible with almost all flocculants based on inorganic salts of polyvalent metals. The function is based on the following property.Download diagram
Biomicrogel® BMG-C4 Product for Increasing the vegetable oils extraction recovery during their production is capable of separation of the oils from solid particles. The objective after crushing/extraction of fruits/seeds of vegetable oil crop during oil extraction process in aqueous phase and at stages of settlement and centrifuge treatment is to maximize separation of oil held between the particles of crushed crop. Biomicrogel® BMG-C4 Product can be used at each of those stages. Upon contact with oil drops in aqueous phase Biomicrogel® BMG-C4 Product stabilizes at oil-water interface forming submicron polymer films displacing the oil drops from the particles of crushed crop, after which they surface.
Unlike the other Biomicrogel® modifications used as sorbent, flocculant or flocculating agent where strength of films (microcapsules) is critical and must be maintained during ling time, in this case it is critical to just ensure their short-term presence on the surface of the solid particles, ensuring oil separation from the solids and its surfacing on water. After the process is completed Biomicrogel® BMG-C4 Product is distributed in aqueous phase and over solids.
Biomicrogel® BMG-С6 Product for cleaning the hard surfaces has a capacity to separate oils, greases and petroleum products from the solids (metal chips, scale). Upon contact with the solids contaminated with oils Biomicrogel® BMG-С6 Product forms extremely thin film between the solids and oil thereby separating the pollutant from the surface of the solids.
Therefore, it makes cleaning of any solid particles from oils, greases and petroleum products in the washing solution of Biomicrogel® BMG-С6 Product effective. The cleaning process can be intensified by supplementary mixing or heating. The activity of the soil cleanup agent Biomicrogel® BMG-С3 is based on similar concept.
Therefore, we produce Spilltex® membranes used for fabrication of filters of any capacity and for containment of emergency oil spills in form of resistant barriers for shallow rivers and streams, for gathering petroleum products from water surface (scoop nets, oil skimmers), and also for protection of land and soils against pollution with petroleum products (protective meshes for coastal area, sumps, soil).
WONDER LAB ®
act as colloidal stabilizers of emulsions, regulatingthe detergent compound thickening
which decreases consumption of the detergent (e.g.,at dishwashing, floor mopping).
a greasy, oily or hard pollution particle ends upin detergent solution after separation. Biomicrogel®️ keepthe particle in solution and prevent it from redeposition on the cleanedsurface.
capable of collecting metal ions from water, thus decreasingwater hardness and promoting effective and quick break-up of natural andvegetable surface active agents (SAA)
That promotes increase of detergent solution capacity with respect to pollutants and with SAA concentration decreasing at the same time, allows to decrease the reheat temperature of detergent solution for their break-up, and provides good SAA rinsability from the cleaned surfaces
The combination of these functions integrated with detergents and cosmetic products helps to avoid maintaining excess SAA concentrations, significantly decrease or eliminate from composition such undesirable components as phosphates and phosphonates, synthetic anionic surface-active agents, agents containing active chlorine et al, and replace them with environmentally friendly biodegradable SAA in moderate concentrations. Eventually, that enables production of highly effective detergents and cosmetics in mid-range segment completely safe for environment and humans.
We have registered more than 100 patents, industrial prototypes and trademarks around the world
All technologies developed by the company are patentedin Russia and more than 60 countries overseas. The company holds an extensive Intellectual Property portfolio.
Certification and Technical Documents
All products of the companyare provided along with portfolio of required technical documents, permits andapprovals.Technical support
The company has a full service inhouse R&D
The R&D center employs recognized experts in organic synthesis and multicomponent chemical reactions.
The R&D is managed by Doctor and Ph.D. in Chemical Engineering holding joint patents and having appropriate experience of cooperation with major global corporations.
He is also an editor of international academic periodicals and facilitator of conferences in organic synthesis. The leaders of disciplines are Masters of Sciences having more than 10-years’ experience, included but not limited to overseas laboratories, and wide range of academic papers published in quoted foreign periodicals. 22 experts are employed by R&D Center altogether.
The R&D center includes 4 laboratories: two research labs where the new products are actually developed, technology lab where the comprehensive solutions are developed on their basis, and testing laboratory where all developed products and solutions are tested. The laboratories are equipped with contemporary equipment and state-of-the-art procedures for conduction of research and tests.
In addition, the company has two pilot production facilities: one for scaling technologies of industrial agents’ production and the second for fine-tuning technologies of detergents and cosmetics production. During perfection of production technologies, a portfolio of documents for large-scale mass production is generated at the experimental facilities, which is then handed over to fabrication shops.